HAVE DIMENSIONS VERIFIED FOR INSTALLATION PURPOSES
# - Chain 907-E51 can be furnished with bushings in both the barrel and pin ends.
* - Subject to service factor Table 9 and Speed Factor Table 10
^ - Maximum sprocket tooth width
Dimensions (Inches)
| Assembly - The 900 class chains are furnished in cottered construction only. When non-corrosive pins are used non-corrosive cotters are also furnished. |
| Operation On Double Sprockets - Webster's one piece double sprocket assures accurate alignment of the chain on the sprocket. They are available either in cast iron or with chilled rim, and in solid or split construction for ease of assembly. For longer chain and sprocket life it is recommended that no less than 12 tooth sprockets be used. |
| Interchangeability - These chains are interchangeable with other standard makes of corresponding sizes and numbers, please refer to our future Interchangeability Charts. |
| Application - This chain was designed primarily for sugar mill
service. Multiple strands may have overlapping, beaded slats mounted on them to form
a continuous apron for an intermediate Carrier Conveyor. HAVE DIMENSIONS VERIFIED FOR INSTALLATION PURPOSES # - Chain 907-E51 can be furnished with bushings in both the barrel and pin ends. * - Subject to service factor Table 9 and Speed Factor Table 10 ^ - Maximum sprocket tooth width Dimensions (Inches) |
| Chain No. | Average Pitch Inches | Approx. Links in 10 Feet | Average Weight Per Ft. Lbs. | Average Ultimate Strength in
Lbs. Duramal |
Rated Working Load in Lbs. * Duramal |
(X) | (G) | (A)^ | (H) | (K) | (J) | (M) | (N) | (S) |
907-E51 # |
3.170 |
38 |
11.6 |
31250 |
4920 |
2 1/4 |
23/32 | 1 3/32 | 1 7/16 | 2 27/32 | 2 23/32 | 1 3/64 | 1 1/2 | 1 21/32 |
907-R51 |
3.170 |
38 |
14.2 |
31250 |
4920 |
2 1/4 |
23/32 | 1 3/32 | 1 13/32 | 3 1/16 | 2 15/16 | 1 3/64 | 1 1/2 | 1 21/32 |
