Combination and Rollerless Chains
Combination and Steel
Bushed Rollerless Chain.
The following pages contain Standard
Combination Chain and attachments; WS, DW, and Outboard Roller Combination Chain and
attachments; Steel Bushed Rollerless Chain, Turbo Chain. Full technical,
interchange and dimensional data is shown. To send an Email to our Customer Service Department (Click Here).
Combination & Steel Bushed Rollerless Chains
- Standard Combination Chain -The
Combination Chain is made of cast block links and steel side bars alternately
spaced. The "N" combination chains have pear shaped barrels to provide
additional metal where the chain engages the sprocket teeth to increase the service life
of the chain. The close fitting joints in combination chain tend to keep out
particles of abrasive material, preventing wear. The large wearing surfaces further
reduce wear. Making the chain desirable where gritty material is handled and an
inexpensive chain is required. The pins are milled flat on the end and are
accurately fitted in to correspondingly shaped holes in the steel side bare. This
confines pin wear to inside of the long barrel of the block link, thus insuring minimum
elongation of the pitch.
- WS, DW, Outboard Roller Combination Chain - The Steel Bushed
Rollerless Chain is designed as a substitute for chain of the combination type where
conditions require a heavier and more rugged chain for heavy duty service.
- Steel Bushed Rollerless Chain - The double offset wearing shoes
on the cast link provides wearing surfaces for both carrying and return runs, thus
increasing chain life. Multiple strands are sometimes used to
- TS856 Turbo Chain - "To Withstand The Harsh Cement
Industry"