Cast Chain

Cast Chain with attachment

       The following pages contain 400 class pintle chain and attachments, H class mill chain and attachments, 700 class pintle chain and attachments, H class type drag chain and attachments, combination type drag chain, transfer chain and 900 and 900r class intermediate carrier chain.  Full technical, interchange and dimensional data is shown.  To send an Email to our Customer Service Department (Click Here).

Cast Chain Types

	400 Class Pintle Chain // H Class Mill Chain // 700 Class Pintle Chain -The Pintle Chains are of one-piece, cast, offset link construction joined together by steel pins.  These pins are securely locked against turning in the side bars by generous head stops cast on the links.  The head stops are positioned to provide maximum locking effect when the chain is under load.  This continues the wear to that part of the pin inside the barrel of the link, where it is distributed over the maximum area.  This insures the best durability of the chain.
	H Type Drag Chain - H Type Drag Chains have links that are designed to operate in troughs or runways, in single or multiple strands.  The underside of the links are broad to provide liberal wearing surface.  The riveted pins are made of medium carbon steel and have T-heads, which are securely fitted between lugs cast on the side bars.  This prevents the pins from turning in the side bars.   The pin articulates in the barrel which distributes the wear over the maximum area.
	Combination Type Drag Chain - The double offset wearing shoes on the cast link provides wearing surfaces for both carrying and return runs, thus increasing chain life.  Multiple strands are sometimes used to handle larger amounts and larger objects.  Combination type drag chains are designed with sections of heavier than comparable sizes of H type drag chain.  They have higher working load ratings and provide long, dependable service under severe operating conditions.  Due to their rectangular design, the rugged center links provide maximum resistance to distortion from chain pulls encountered in drag conveyor service.  Block links are made in Duramal.  Pins are heat treated carbon steel.
	900 & 900R Class Intermediate Carrier Chain - The standard 900 Class chain has heat treated stainless steel bushing keyed in the barrel and medium carbon heat treated pins.  The pins are securely locked in the Duramal links with lugs cast on to make a tight fit with the T-head pins.  The barrel of the link has a maximum of wearing surface and open end wearing shoes to prevent tilting as relieving part of the pin load.  The chain can be furnished with stainless steel pins.  Bushings and pins may be renewed in the field.  900R chain has outboard rollers to engage the double sprocket teeth, which eliminates the scrubbing action.   It has heat treated stainless steel replaceable pins, bushing and rollers so that all of these parts can be renewed.  Even greater life has been achieved in these links by adding copper to reduce corrosion.
	Transfer Chain - Transfer Chains of this series are made of riveted construction.  The T-heads of the pins fit between two lugs cast on the side bars of the chain links.  This prevents the pins from turning in the side bars, thus insuring minimum elongation of pitch and maximum durability.