CONVEYOR LENGTHS AND MOTOR SIZE REQUIRED
| BASE SIZE | STROKE & FREQ. | MOTOR SIZE (1800 RPM) | |||
| 1 HP | 2 HP | 3 HP | 4 HP | ||
| NARROW | 1/2" @ 585 RPM | 26 | 66 | 100 | 120 |
| WIDE | 16 | 42 | 66 | 100 | |
CAPACITIES MAY BE SIGNIFICANTLY INCREASED FOR SPECIFIC APPLICATIONS
Material Weight - LBS/CU. FT. >
Webster FSL Vibrating Conveyors are equipped with the P3000 positive, eccentric drive. It is equipped with heavy-duty self aligning-roller bearings.
CAPACIY - T.P.H.
The nominal rated capacity of the standard Webster FSL Vibrating Conveyors is shown on the chart. This chart is based on a conveying speed of 25 fpm (1/2" stroke @585 rpm). CLICK HERE: For further information on selection.
Pans for the standard Webster FSL Vibrating Conveyors are made with the sides flared so the width is greater at the top than at the bottom. Standard pan widths are 12" and 18" as measured at the bottom. Standard pan thickness is #10 gauge for the 12" width and 3/16" for the 18" width. The base is a heavy formed steel channel with the web on top. This style of base has no pockets to catch and hold foreign material. The base has anchor bolt pads welded on its underside so it contacts the foundation only where it is attached to it.
These links will show you detailed Drive arrangement plans for a narrow base conveyor
and a wide base FSL Conveyor.
CLICK HERE: To view the narrow base FSL
drive arrangement and discharge end extension widths.
CLICK HERE: To view wide base FSL drive arrangement and discharge end extension widthsTo view wide base FSL drive arrangement and discharge end extension widths.