CONVEYOR LENGTHS AND MOTOR SIZE REQUIRED
| PAN WIDTH @ BOTTOM | STROKE & FREQ. | MOTOR SIZE (1800RPM) | |||||
| 1HP | 2HP | 3HP | 5HP | 7 1/2HP | 10HP | ||
| 18 | 9/16" @ 585 | 8 | 30 | 46 | 68 | 100 | 120 |
| 24 | - | 25 | 38 | 60 | 86 | 105 | |
Material Weight - LBS./CU. FT.
NOTE: IN ADDITION TO STANDARD SECTIONS, MANY ACCESSORIES AND SPECIAL FEATURES CAN BE SUPPLIED.
CAPACITY - T.P.H. -
Webster FSM Conveyors are equipped with the P5000 positive, eccentric drive. It is equipped with heavy-duty self-aligning roller bearings.
The nominal rated capacity of the standard Webster FSM Vibrating Conveyors is shown on the chart above. This chart is based on a conveying speed of 45 fpm (9/16" stroke at 585 rpm). CLICK HERE: For further information on selection.
Pans for the standard Webster FSM Vibrating Conveyors
are made with the sides flared so the width is greater at the top than at the bottom.
Standard pan widths are 18" and 24" as measured at the bottom.
Standard pan thickness is 3/16".
The base is a heavy formed steel channel with the web on top.
This style of base has no pockets to catch and hold foreign material. The base has anchor
bolt pads welded on its underside so it contacts the foundation only where it is attached
to it.
CLICK HERE: To view FSM Pan Dimensions.
CLICK HERE: To view FSM Drive Arrangement Dimensions.