1.  Application

Please provide a brief description of your conveying application for engineering class chain, like - conveyor type, drag, flight, apron - how the conveyor is being loaded - where the conveyor will discharge. 

2.  Material and Quantity:

Enter in the box what material is being handled, and in what quantity.  Please provide the quantity being handled and the unit of measure, like tons per hour (TPH), cubic feet per hour (CFH) and bushels per hour (BPH).  We also need the material bulk density, usually expressed in lbs. per cubic foot (PCF), or kilogram per cubic meter, the size of the particles, and include any special consideration such as abrasiveness, corrosive, or fluid properties that will effect handling.
Material:   
Quantity: (Normal) (Surge)  Units: TPH CFH BPH
Density:   Units:  Lbs./Cubic Foot Kg/Cubic Meter
Particle Size: 
Properties:

3.  Environment

Please list the elements of the environment the chain will be operating in, like indoor or outdoor location, operating temperature range, dust and moisture contamitnation.   Also operating parameter like hours per day of operation, starting under loads, frequency of starts and stops, is the conveyor reversible, and if the conveyor is being used to accumulate material.
Location:  Indoors / Outdoors / Other
Operating temperature range:  Units:  Fahrenheit Celsius
Hours of Operation per day:  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 22 23 24 Is the conveyor reversible? Yes / No
Frequency of starts and stops:
Is the conveyor being used to accumulate material?  Yes / No

4. Conveyor Profile, Sprocket Size & Center Distances

PLEASE CHECK THE BOX THAT CORRESPONDS WITH YOUR DESIRED CONVEYOR LAYOUT.

       
Inclined         Inclined Comb1    Inclined Comb2      Horizontal    Vertical

Sprocket/Traction Wheel Size: 
Center Distance:    UNITS:  Feet Meters

5. Number of Strands:  1 2 3 4 5 6 7 8 9 10

6. Speed Rquirements:

    Please specify the unit of measure such as feet per minute.
Speed:Units: MPH FPM KM/Minute M/Second KPH Meter/Minute

7. Type of Chain Required

Please tell us the type of chain you require, if known (Steel Bushed Roller, Combination, Welded Steel, etc.), and a previous chain used, if any, including chain number and manufacturer.

8. Attachments

Please describe any attachments to the chain that is required, including attachment number or description, spacing (number of pitches or distance) between attachments, and the weight of the attachment if known.  (Examples, wings, pushers, flights, wear pads, etc.)

9. Description & Material of Travel Surface, Lubrication Requirements. 

Please tell us the type and material of the track, rail, or wear strip that the chain will run on, and lubrication, including water, that chain will receive.

10. Special Materials of Construction

If you know of any special materials requirements that are required for the chain by your application, please list them here.

Webster Industries, Inc. will review the information supplies, and make it our goal to respond to any request by the next business day with at least a verification of receipt and the current status of your request.  In order for us to help you make the best selection possible, please provide us with as much information as you can.  If more information is required, you will be contacted by a Webster representative.  Please complete the form below, so that we have the information required to contact you.

Contact Information