HAVE DIMENSIONS VERIFIED FOR INSTALLATION PURPOSES
* - Subject to Service Factor Table 9 and Speed Factor Table 10.
CLICK HERE: To view the C1-C3-C4 Attachment.
CLICK HERE: To view the WING Attachment.
DIMENSIONS IN INCHES
| Material - H Type Drag Chain links are cast of high grade Duramal. Duramal is a heat treated malleable iron having greater strength and superior resistance to wear and abrasion. Pins are heat treated. |
| Assembly - Furnished in riveted construction unless otherwise specified |
| Operation - The narrow ends of the links should be in the direction of travel. The maximum speed recommended is 100 FPM. |
| Interchangeability - Please refer to our INTERCHANGE Directory |
| Application - This type of chain is designed for heavy duty
operation imposed by drag conveyor service. It is usually dragged in troughs and
used for moving sawdust, refuse, fine coal, ashes and other materials, in places where an
economical installation is required. MULTIPLE strands may be used to handle larger
capacities. MAXIMUM chain speed depends upon size of sprockets. For Conveyor
Service see TABLE 2. HAVE DIMENSIONS VERIFIED FOR INSTALLATION PURPOSES * - Subject to Service Factor Table 9 and Speed Factor Table 10. CLICK HERE: To view the C1-C3-C4 Attachment. CLICK HERE: To view the WING Attachment. DIMENSIONS IN INCHES |
| Chain No. | Average Pitch Inches | Approx. Links in 10 Feet | Average Weight Per Ft. Lbs. | Average Ultimate Strength in Lbs. Duramal |
Rated Working Load in Lbs.* Duramal |
Barrel Length(X) | Side Bar Width(F) | Max. Spkt. Width(A) | Pin Dia.(D) | Over All (S) | Attachment Numbers |
| H102 | 5.000 | 24 |
10.7 | 35000 |
5830 |
7 3/4 | 1 1/2 | 6 3/8 | 5/8 | 9 7/8 | Wing |
| H104P | 6.000 | 20 | 8.0 | 35000 |
5830 |
5 5/16 | 1 1/2 | 4 1/8 | 5/8 | 7 11/16 | C4, Wing |
| H104W | 6.000 | 20 | 8.0 | 35000 |
5830 |
5 5/16 | 1 1/2 | 4 1/8 | 5/8 | 7 3/8 | |
| H110 | 6.000 | 20 | 13.3 | 35000 |
5830 | 10 5/8 | 1 1/2 | 9 | 5/8 | 12 11/16 | C1, C3, Wing |
| H112 | 8.000 | 15 | 10.8 | 35000 |
5830 |
10 5/8 | 1 1/2 | 9 | 5/8 | 12 3/4 | Wing |
| H113 | 6.000 | 20 | 16.7 | 37500 |
6400 |
10 5/8 | 1 9/16 | 9 | 3/4 | 12 3/4 | |
| H116 | 8.000 | 15 | 14.6 | 35000 |
5830 |
14 7/16 | 1 5/8 | 12 1/2 | 5/8 | 16 11/16 | |
| H120 | 6.000 | 20 |
18.5 |
47500 |
7920 |
10 1/8 |
2 |
8 3/4 |
3/4 |
12 3/4 |
|
| H480 | 8.000 | 15 |
18.1 |
50000 |
8330 |
12 11/16 |
2 |
11 1/8 |
3/4 |
16 |
H Type Drag Chain