CLICK HERE, to return to the previous page.
Material - Side bars are made of medium carbon hear
treated steel. Pins are alloy steel heat treated. The barrels are
carbon steel
or alloy steel case hardened. Lube holes are standard on some chains.
Assembly - Riveted construction is recommended for
elevators and sawmills. Cottered construction is recommended for elevators and
conveyors. Riveted or cottered construction must be SPECIFIED. Chain pins will
be staggered, except on HSB131 & HSB188.
Interchangeability - This chain is interchangeable with other standard makes of
corresponding sizes and elevators.
Application - These chains are used for bucket
elevators operating under gritty and abrasive conditions. These chains have proved
themselves in operation for long life and low maintenance. Some are accepted
elevator chains for wide buckets
Maximum chain speed depends upon size of sprockets. For Conveyor Service se Table 2.
* - Subject to Service Factor Table 9 and Speed Factor Table 10.
PLEASE CLICK HERE TO LOOK AT SCHEMATICS OF AVAILABLE PIN AND BARREL STYLES
TO VIEW ATTACHMENT DATA, please click on the desired attachment below the charts.
NOTE: DUE TO THE AMOUNT OF DATA ON THE STEEL BUSHED ROLLERLESS CHAIN THE CHART
WAS BEEN SPLIT. ALSO THE AVAILABLE PIN AND BARREL STYLES ARE LOCATED AT THE BOTTOM
OF THE PAGE.
** - HAVE DIMENSIONS VERIFIED FOR INSTALLATION PURPOSES
^ - Has alternate long (7.240") outer side bar pitches and regular (4.760")
inner side bar pitches.
# - Outer side bars 3", inner side bars 4". Can be furnished with both
inside and outside side bars of 4".
## - Outer side bars 2 1/2, inner side bars 3 1/4". Can be furnished with both
inside and outside side bars of 3 1/4".
### - Outer side bars 2 1/2", inner side bars 3"
|
Chain No. (**) |
Style | Average Pitch (Inches) | Approx. Links in 10 Feet | Average Weight Per Ft. Lbs. | Average Ultimate Strength Lbs. | Rated Working Load * | Side Bars | Width Between Side Bars (W) | |
| Thickness and Height | Material | ||||||||
| TxF | |||||||||
| HSB188 | S | 2.609 | 46 | 3.8 | 25,000 |
2,730 | 1/4 X 1 1/8 | M.C.H.T. | 1 1/16 |
| HSB131 | S | 3.075 | 39 | 7.4 | 40,000 |
4,380 | 3/8 X 1 1/2 | M.C.H.T. | 1 1/4 |
| HSB102B | S | 4.000 | 30 | 6.9 | 40,000 |
6,290 | 3/8 X 1 1/2 | M.C.H.T. | 2 1/8 |
| HSB825 | O | 4.000 | 30 | 8.7 | 60,000 |
5,900 | 3/8 X 2 | M.C.H.T. | 1 1/2 |
| HSB102 1/2 | S | 4.040 | 30 | 9.4 | 50,000 |
7,700 | 3/8 X 1 3/4 | M.C.H.T. | 2 3/16 |
| HSB111 | S | 4.760 | 25 | 10.2 | 50,000 |
8,850 | 3/8 X 2 | M.C.H.T. | 2 5/8 |
| HSB111SP^ | S | 4.760 7.240** |
20 | 8.8 | 50,000 |
8,850 | 3/8 X 2 | M.C.H.T. | 2 5/8 |
| HSB110 | S | 6.000 | 20 | 6.3 | 40,000 |
6,290 | 3/8 X 1 1/2 | M.C.H.T. | 2 1/8 |
| HSB830 | O | 6.000 | 20 | 7.5 | 60,000 |
5,900 | 3/8 X 2 | M.C.H.T. | 1 1/2 |
| HSB833 | S | 6.000 | 20 | 9.0 | 50,000 |
8,850 | 3/8 X 2 | M.C.H.T. | 2 5/8 |
| HSB844 | S or O | 6.000 | 20 | 10.4 | 65,000 | 9,200 | 1/2 X 2 | M.C.H.T. | 2 1/2 |
| HSB860B | S | 6.000 | 20 | 15.0 | 100,000 | 10,500 | 1/2 X 2 1/2 | M.C.H.T. | 2 |
| HSB956 | S | 6.000 | 20 | 17.3 | 100,000 | 14,000 | 1/2 X 3 ### | M.C.H.T. | 3 |
| HSB857A | S | 6.000 | 20 | 21.0 | 130,000 | 14,000 | 1/2 X 3 1/4 ## | M.C.H.T. | 3 |
| HSB850 | S or O | 6.000 | 20 | 23.5 | 200,000 | 16,000 | 5/8 X 3 | M.C.H.T. | 2 1/4 |
| HSB826 | O | 6.000 | 20 | 14.0 | 95,000 | 9,570 | 3/8 X 2 1/2 | M.C.H.T. | 2 3/8 |
| HSB859B | S | 6.000 | 20 | 34.0 | 200,000 | 21,875 | 5/8 X 4 # | M.C.H.T. | 3 3/4 |
| HSB1654 | O | 6.000 | 20 | 32.0 | 230,000 | 18,375 | 5/8 X 4 | M.C.H.T. | 2 1/4 |
| HSB851 | S or O | 6.000 | 20 | 30.0 | 200,000 | 24,5000 | 5/8 X 3 1/2 | M.C.H.T. | 2 3/4 |
| HSB150 PLUS | S | 6.050 | 20 | 16.6 | 100,000 | 15,100 | 1/2 X 2 1/2 | ]M.C.H.T. | 3 3/9 |
| HSB864B+ | S | 7.000 | 17 | 32.0 | 200,000 | 21,875 | 5/8 X 4 # | M.C.H.T. | 3 3/4 |
| HSB2866 | S | 7.000 | 17 | 35.4 | 200,000 | 27,370 | 5/8 X 4 # | M.C.H.T. | 4 1/2 |
| HSB886 | O | 7.000 | 17 | 42.0 | 350,000 | 24,200 | 3/4 X 4 | ALYH.T. | 2 3/4 |
|
Chain No. (#) |
OVERALL WIDTH | PINS | BARRELS | Attachment Numbers | |||||
| To Cottered End | To Head or Riveted End | ||||||||
| Diameter | Style | Material | Outside Diameter (H) | Style | Material | ||||
| K | J | D | |||||||
| HSB188 | 1 11/32 | 1 7/32 | 1/2 | A | ALY.H.T | 7/8 | 2 | L.C.C.H. | |
| HSB131 | 1 13/16 | 1 5/8 | 5/8 | A | ALY.H.T. | 1 1/4 | 4 | L.C.C.H. | |
| HSB102B | 2 3/16 | 2 1/16 | 5/8 | A | ALY.H.T. | 1 | 2 | L.C.C.H. | |
| HSB825 | 2 1/32 | 1 25/32 | 3/4 | A | ALY.I.H. | 1 1/8 | 2 | --- | A2,A42,K2 |
| HSB102 1/2 | 2 3/8 | 2 1/8 | 3/4 | A | ALY.I.H. | 1 3/8 | 2 | L.C.C.H. | A2,K2,S1 |
| HSB111 | 2 19/32 | 2 11/32 | 3/4 | A | ALY.I.H. | 1 7/16 | 2 | L.C.C.H. | |
| HSB111SP | 2 19/32 | 2 11/32 | 3/4 | A | ALY.I.H. | 1 7/16 | 2 | L.C.C.H. | K2 |
| HSB110 | 2 3/16 | 2 1/32 | 5/8 | A | ALY.H.T. | 1 1/4 | 4 | L.C.C.H. | |
| HSB830 | 2 1/32 | 1 25/32 | 3/4 | A | ALY.I.H. | 1 1/8 | 2 | L.C.C.H. | A2, A42, K2 |
| HSB833 | 2 19/32 | 2 11/32 | 3/4 | A | ALY.I.H. | 1 7/16 | 2 | L.C.C.H. | K2M |
| HSB844 | 2 23/32 | 2 17/32 | 3/4 | A | ALY.I.H. | 1 1/8 | 2 | L.C.C.H. | A2, K2 |
| HSB860B | 2 17/32 | 2 11/32 | 1 | F | ALY.I.H. | 1 3/4 | 6 | ALY.C.H. | ---- |
| HSB956 | 3 | 2 27/32 | 1 | F | ALY.I.H. | 1 3/4 | 5 | ALY.C.H. | A2M,K2M,K24M, K3M, K35M |
| HSB857A | 3 5/32 | 2 27/32 | 1 | F | ALY.I.H. | 1 3/4 | 5 | ALY.C.H. | K2M, K44 |
| HSB850 | 3 | 2 23/32 | 1 5/16 | A | ALY.I.H. | 2 | 6 | ALY.C.H. | ---- |
| HSB826 | 2 19/32 | 2 7/32 | 7/8 | B | ALY.I.H. | 1 1/2 | 2 | L.C.C.H. | K2/K3 |
| HSB859B | 3 25/32 | 3 15/32 | 1 1/4 | F | ALY.I.H. | 2 3/8 | 6 | ALY.C.H. | K44 |
| HSB1654 | 3 1/32 | 2 25/32 | 1 1/2 | B | ALY.I.H. | 2 1/2 | 6 | ALY.C.H. | ---- |
| HSB851 | 3 11/32 | 2 31/32 | 1 3/4 | B | ALY.I.H. | 2 3/8 | 6 | ALY.C.H. | ---- |
| HSB150PLUS | 3 7/32 | 3 1/32 | 1 | A | ALY.I.H. | 1 3/4 | 6 | ALY.C.H. | A2M,K2M,K3M |
| HSB864B | 3 23/32 | 3 15/32 | 1 1/4 | F | ALY.I.H. | 2 3/8 | 6 | ALY.C.H. | K443 |
| HSB2866 | 4 5/32 | 3 17/32 | 1.36 | F | ALY.I.H. | 2 3/8 | 6 | ALY.C.H. | K3 |
| HSB886 | 3 23/32 | 3 7/32 | 1 5/8 | F | ALY.IH. | 2 5/8 | 66 | ALY.C.H. | --- |
Attachment A22# & A42 / Attachment
K1 / Attachment K2 Straight
Attachment K2 Offset / Attachment K2
K3 HSB826
Attachment K2M, K24M, OSSB ONLY / Attachment
K3M 150 PLUS OSSB ONLY
Attachment K3 HSB 2886, OSSB ONLY / Attachment
K3M, K35M OSSB ONLY
Attachment K44 and Attachment K443
PLEASE CLICK HERE TO LOOK AT THE AVAILABLE PIN AND BARREL STYLES