Engineered
Class Chains
Chain Resources
Contact Us
Combination
Type Drag Chain
- Overview
- Assembly
- Interchangeability
- Application
- Operation
- Specifications
Combination type drag chains are designed with sections heavier than comparable sizes of H type drag chains. The double offset wear shoes on the cast link provide wear surfaces for both carrying and return runs, thus increasing chain life.
Industries
Riveted construction is furnished unless cottered construction is requested.
Combination type drag chains are interchangeable with other standard makes of corresponding sizes and numbers.
Combination type drag chains operate in troughs and are primarily used to handle nonabrasive materials in the lumber, pulp and paper industries. If the service is intermittent it can be used for the conveying of ash and other small abrasive materials.
The construction of this chain permits it to travel in one direction only. A maximum speed of 100 FPM is recommended. Maximum chain speed depends upon size of sprockets. For Conveyor Service see Table 2, Section A.
Combination Type Drag Chain Product Specifications
Product Information
Dimensions are in inches unless otherwise noted.
Dimensions:
Product Chart:
Swipe to See More
Chain No. | Average Pitch Inches | Approx. Links in 10 feet | Average Weight Per Ft. Lbs. | Dimensions in Inches | |||||||
Average Ultimate Strength in Lbs. | Rated Working Load in Lbs. | Barrel Length | Sidebar Width | Max. Spkt. Width | Pin Dia. | Overall Width | Sidebar Thk. | ||||
Duramal | Duramal | X | F | A | D | S | T | ||||
6104 | 6 | 20 | 10 | 52,500 | 8,750 | 5 1/2 | 1 1/2 | 3 13/16 | 4-Mar | 7 1/2 | 8-Mar |
6110 | 6 | 20 | 13.5 | 52,500 | 8,750 | 10 1/2 | 1 1/2 | 9 | 4-Mar | 12 3/4 | 8-Mar |
8116 | 8 | 15 | 14 | 52,500 | 8,750 | 14 5/16 | 1 5/8 | 12 3/8 | 4-Mar | 16 1/2 | 8-Mar |
8480 | 8 | 15 | 20 | 70,000 | 11,670 | 12 3/4 | 2 | 10 1/2 | 8-Jul | 15 7/8 | 2-Jan |
Dimensions are in inches unless otherwise noted.